Introduction: A steel mold lasts longer when cleaning and storage are handled as part of daily work. Cement residue, standing water and rough lifting can shorten service life even when the mold is well made.
Description: A High speed rail mold is made from steel, but it still needs care after each production round. Cement residue should be removed from the inner face, corners, bolt holes and joint lines before it becomes hard.
If old cement stays in the corner, the next concrete part may come out with marks or broken edges. Storage also affects a High speed rail mold. Split panels should rest on flat supports rather than lean on uneven ground. Painted surfaces should be repaired when scratches appear, especially if the mold will be stored outdoors or near rainwater.
Key Details: Common damage often comes from ordinary habits: dragging panels, forcing side plates open, lifting from weak edges or letting bolts collect hardened cement.