Concrete Railway Mold

The Concrete railway mold is prepared for high speed rail precast work where the project needs clear dimensions and repeatable forming faces.
Its main references include Q235 hot rolled steel, a 4 mm main plate, 80 x 10 mm rib plates, No. 8 channel steel frame and a common size of 2 m x 0.2 m x 0.7 m.

Send Inquiry

This Concrete railway mold is produced for precast railway boards that need fixed size, clean edges and repeatable assembly. Before pouring, the inner surface can be treated with release oil, and the reference concrete grade is C40. A common board section is about 2 m long, 0.2 m wide and 0.7 m thick. The mould has side panels, bottom supports and reinforcing plates so that concrete pressure is shared across the frame. During packing, our workers check panel flatness, bolt holes and seam contact. The structure is kept simple enough for site workers to assemble without wasting time.

Product Parameters

Parameter	Value	Notes
Main material	Q235 hot rolled steel	From supplied railway shuttering board notes
Main plate thickness	4 mm	Board forming face
Rib plate	80 x 10 mm	Reinforcement area
Base frame	No. 8 channel steel	Bottom support
Common size	2 m x 0.2 m x 0.7 m	Railway shuttering section
Concrete grade reference	C40	Pouring note
Demolding time	72 hours	Site operation reference
Component tolerance	±3 mm	Precast part reference