The construction standards for four-legged concrete formwork provide detailed instructions on both its use and transportation. Similar to manhole and water tank formwork, if the formwork is made of steel plates, it must be protected from moisture and damage. A clean location should be chosen for the production of precast concrete components to prevent damage to the formwork itself. The overall production time for precast concrete components using formwork is very short, which is why many projects choose this method. Damage to the formwork must be avoided, as severe damage requires significant time for remaking and causes inconvenience for construction workers, ultimately delaying the project schedule.
From production to placement, a dedicated worker is needed to keep records of the four-legged concrete mold. Timely recording of the mold's condition at each stage is an important way to extend its service life. If any problems are found, they should be dealt with promptly, or the mold manufacturing factory should be contacted to remake the mold. After use, the four-legged concrete mold must be cleaned in time. If water is not enough to clean the mold, use a brush to scrub it to avoid damage. After use, the mold must be placed in a clean and dry place, such as a large warehouse, to avoid prolonged exposure to a humid environment.